Caring for your ring

Bands and rings made up of hardwood can last for as long as a metal one with proper care. However, proper care can help to ensure that these rings in good condition. Our rings are always sealed with a waterproof epoxy resin or treated with a waterproof layer, and strengthened with metals to ensure they last longer.

- For rings with an exposed wooden element, it is best to avoid prolonged exposure to moisture, chlorinated water, and chemicals. We recommend removing it during harsh activities such as cleaning with heavy duty chemicals or heavy work outs.

- Bringing your ring into the shower or wearing while washing up occasionally should generally be fine if the wooden element is protected by an epoxy resin.

- If your ring has an exposed wooden element, ensure it is dried using a soft cloth as soon as possible after exposure to moisture.

- Do not leave your ring in direct sunlight or exposure or in hot and humid environments.

Cleaning your ring

Our rings are sealed in a waterproof epoxy coating, and any hardwood inlays are protected in an epoxy resin coating which means there is no need to use polish. However over time there may be a build up of dirt on your ring. Here are some easy steps for cleaning your ring:

Step 1 - You can clean and remove dirt or dust from hardwood bands and rings with a dry soft microfiber cloth.

Step 2 - Using fresh water to clean off any stubborn dirt build up should also be suitable, so long as the ring is dried thoroughly with a soft towel. 

Step 3 - If your ring has a metal element, lightly damp a cloth in a solution of water and a few drops of mild soap and wipe away any dirt build up.